Milking Bulk Tanks, Milk Measurement, Plate Coolers & Chillers
Category: Milk Tanks, Milk Measurement, Plate Coolers, Chillers
Bulk Tanks & Milk Measurement
Schlueter Milking Bulk Tanks & Milk Monitoring/Measurement
Safgard™ Cooling Systems
- Foam-In-Place Polyurethane Insulation, highly moisture resistant
- Three times more effective than other insulation
- Forms a solid bond between inner & outer tank to increase the rigidity and structural strength
- Thermal Barrier Between inner tank & support channel ensures no metal-to-metal contact
- This no metal-to-metal contact minimizes heat transfer
| Schlueter Safgard™ Cooling System Packages | ||
|---|---|---|
| Description / Model | Bulk Tank Only Part # | Bulk Tank w/ Condensing Unit Part # |
| SDL-1500 Gal. Tank (2-4 HP as "System") | 47381-E | 47380-G |
| SDL-1500 Gal. Tank (2-5 HP system) | 47381-F | 47380-H |
| SDL-2000 Gal. Tank (2-5 HP system) | 47381-G | 47380-I |
| SDL-2500 Gal. Tanl (2-5 HP system) | 47381-H | 47380-J |
| SDL-3000 Gal. Tank (2-5 HP system) | 47381-I | 47380-K |
| SDL-4000 Gal. Tank (4-5 HP system) | 47381-J | 47380-L |
| SDL-5000 Gal. Tank (4-5 HP system) | 47381-K | 47380-M |
| SDL-6000 Gal. Tank (4-5 HP system) | 47381-L | 47380-N |
| SDL-7000 Gal. Tank (4-5 HP system) | 47381-M | 47380-P |
| SDL-8000 Gal. Tank (4-5 HP system) | 47381-N | 47380-Q |
| Description / Model | Unit Part # | |
| 3 HP Condensing Unit Only - 1 Phase | 47382-A | |
| 4 HP Condensing Unit Only - 1 Phase | 47382-B | |
| 5 HP Condensing Unit Only - 1 Phase | 47382-C | |
| 3 HP Condensing Unit Only - 3 Phase | 47382-D | |
| 4 HP Condensing Unit Only - 3 Phase | 47382-E | |
| 5 HP Condensing Unit Only - 3 Phase | 47382-F | |
| 3 HP Condensing Unit Only - 3 Phase Scroll | 47382-G | |
| 4 HP Condensing Unit Only - 3 Phase Scroll | 47382-H | |
| 5 HP Condensing Unit Only - 3 Phase Scroll | 47382-I | |
| 2550-4000 Front Mounted Glass Calibration Sight Gauge | 47380-S | |
| 5000-7000 Front Mounted Glass Calibration Sight Gauge | 47380-T | |
Sunset™ Bulk Tank Washers Washer: Part# 47315 Ctrls. Part# 47315-3 1 HP Pump #47315-2 4 or 6 cycle – user has option not to use sanitation cycles
– Pre-rinse without recirculation–only clean water sprayed into tank and drained directly out
– Rinse Cycle: Lukewarm water, recirculated, tempers tank interior, drained
– Wash Cycle – Hot water and detergent recirculated, positive cleaning, then drained Rinse Cycle: Optional acidified rinse, recirculated, drained
– OFF (Manual Advance – Some users prefer to skip last two cycles; some prefer to delay sanitizing until just before milking.)
– Sanitize Cycle – Sanitize bulk tank
65 GPM, 1 HP, 3450RPM, 115V Motor, SS ctrl. w/ signal light, adj. spinner & 6-cycle autom. ctrl.
(All Sunset washer parts are on page 87-88 of Schlueter Dairy Catalog!)
Sunset Bulk Tank Agitator Systems
Ag Assembly Gear Reducer with Output Flange 1/3 HP Motor Part # 47315-A
Gear Reducer Mt. Plate Only Part # 47315-B
1/3 HP Agitator Motor Part # 47315-K
Gear Box Only Part # 47315-M
Gear Box with Outlet Flange Part # 47315-N
Gear Box Mt. Plate & Adapter Shaft Only Part # 47315-O
- Complete, Tank Ready System, configure to any tank brand, sealed drive- no maintenance
- Many output shaft & mount plate options to fit all brands, no adapters/couplings or break pts
- Thermal overload protection w/ auto reset, aluminum construction that dissipates head
- Tapered roller bearing handles greater axial and radial loads, *Avail. in 3-phase Upon Request
Model MP Milk Cooling Tanks
– The ideal tanks for all home, medium-sized dairy & cheese production facilities
– Fast and stable cooling and maximum energy efficiency
– Fully compliant with all standards & regulations
Model MP15 Milk Cooling Tank with 15 Gal. Capacity (21” W x 42” H) Part # 47390
Model MP30 Milk Cooling Tank with 30 Gal. Capacity (30” W x 48” H) Part # 47391
Model MP60 Milk Cooling Tank with 60 Gal. Capacity (36” W x 49” H) Part # 47392
Model MP90 Milk Cooling Tank with 90 Gal. Capacity (40” W x 50” H) Part # 47393
Model MP140 Milk Cooling Tank with 140 Gal. Capacity (21” W x 42” H) Part # 47394
Model MP170 Milk Cooling Tank with 170 Gal. Capacity (21” W x 42” H) Part # 47394-1
Model MP225 Milk Cooling Tank with 225 Gal. Capacity (21” W x 42” H) Part # 47394-2
Model MP285 Milk Cooling Tank with 285 Gal. Capacity (21” W x 42” H) Part # 47394-3
MP Series Milk Cooling Tank Features
- Standard 110v operation
- Electronic thermostat
- Enclosed condensing unit
- Adjustable legs
- Waterproof agitator motor
- Highly insulated tanks
- Environmentally friendly R404 refrigerant
Schlueter Milk Measurement & Recording Products
FloClean™ Turbine Flow Meters
3-A Approved, Flow Rates & Vol. Total, Temp 300 Degrees Max & (GPM’s .6/3-40/400)
1.5” Turbine Flow Meter with No Hub, Less Cable, with Remote Mt. Transmitter Part # 47000
2” Turbine Flow Meter with No Hub, Less Cable, with Remote Mt. Transmitter Part # 47001
2” Turbine Flow Meter 10 Foot Cable Assembly Only # 47000-1
2” Turbine Flow Meter 20 Foot Cable Assembly Only Part # 47000-2
(RED) Remote Electronic Display Only Part # 47002
Mag Meters w/ Pulse Output
(3-A Approved, No moving parts or pressure loss, NEMA 4X Std. Enclosure, 2 pulse outputs, solid state relay & open collector output, compat. w/ existing batch ctrls or totalizer displays)
1” Mag Meter w/ pulse output w/o display & w/o Remote Mount Part # 47007
2” Mag Meter w/ pulse output w/o display & w/o Remote Mount Part # 47008
2” Mag Meter w/ pulse output with Remote Mount but without display Part # 47008-1
3” Mag Meter w/ pulse output w/o display & w/o Remote Mount Part # 47009
(RED) Remote Electronic Display Only Part # 47002
Dynasonics™ Transit Time Ultrasonic Flow Meters
(Std. w/ meter, 20 ft. cable, remote mt. transmitter & display)
1.5” Meter System: Part # 47003 2” Meter System: Part # 47004
3” Meter System: Part # 47005
Anderson™ Dairy Load-Out Systems
Measure milk weights, total weights/ Measure Individual Srings & 24 hr. milking times
DS1: w/ IZML Flowmeter & FTT ctrlr/printer in SS enclosure, 2 relays for alarms, records keeping
DS2: Same as DS1 w/ pneumatic sampler (takes proportional sample regardless of flow rate
DS3: Flow/Mag Meter w/ dual display rate totalizer in ABS enclosure. (Msr. Group & running totals on separate displays, w/ reset buttons)
DS4: Flow Meter, SS enclosure w/o printer, same as DS1 w/o printer & has 2 Relays for alarms
Anderson-Negele Dairy Load-Out System Parts
DS1: 1.5” # 47024, 2” # 47025, DS2: 1.5” # 47026, 2” # 47027, DS3: 1.5” # 47028 2” # 47029 DS4: 1.5” # 47030 2” # 47031 & Parts: PSD-51 Sampler Diaphragm Only: # 47034 Ink Cartridge: # 47032 Sampler Bottle: # 47035 Sampler Bottle Spring Threads: # 47035-1 Printer: # 47037 Print Paper: # 47033
Anderson™ Tank Level & Valve Control Monitors
Anderson™ Guardian Temp Recorders
Guardian I w/ hi/low temp alarm relay & 25 ft. RTD: Part # 46602
Guardian I with hi/low temp. alarm relay & 50 ft. RTD: Part # 46604
Replacement Charts and Thermowells
24 hr. charts 30-180 deg. F Guardian I/III Part # 46609
48 hr. charts 30-180 deg. F Guardian I/III Part # 46609-1
72 hr. charts 30-180 deg. F Guardian I/III Part # 46609-2
7-day charts 30-180 deg. F Guardian I/III Part # 46609-3
12 hr. charts 30-180 deg. F Guardian I/III Part # 46609-4
48 hr. charts 0-80 deg. C Guardian I/III Part # 46610-1
7-day charts 0-80 deg. C Guardian I/III Part # 46610-3
Thermowell 1.5” Tri-clamp thermowell Part # 46613
Thermowell 2” Tri-clamp Thermowell Part # 46614
2” drywell tube, 8” Long with Tri-clamp Part # 46615
Guardian I & III, & AV-9000 (Adv. HTST Pasteurization Recorder) Parts
Temperature Sensor RTD 3/8” by 25 Feet Part # 46606
Temperature Sensor RTD 3/8” by 50 Feet Part # 46607
Temperature Sensor RTD 3/8” by 75 Feet Part # 46607-2
Temperature Sensor RTD 3/8” by 100 Feet Part # 46607-3
Five Pack of Red Pens Part # 46608
Five Pack of Green Pens use for Guardian III Part # 46550-1
Pen Drive Motor Kit Only Part # 46607-4
Chart Drive Motor Only Part # 46607-5
PCB Board & Switch for Guardian I Part # 46602-1
Plate Assembly Only for Guardian I Part # 46607-7
Chart Hold Down Only Part # 46607-8
Pen Arm Only Part # 46607-9
AV-9000 Recorder Parts (Use for HTST Pasteurization):
AV-9000 Adv. Recorder for HTST Pasteurization Part # 46548
Colored Chart for AV-9000 Recorder Part # 46548-1
Four Color Pen Cartridge Part # 46644-3
Anderson Negele™ Sanitary Temp. Gauges & Probes
Plate Coolers and Chillers
Schlueter Heat Exchangers, Plate Coolers & Commercial Chillers
Safgard™ Cool Milk Stainless 4” Shell-And-Tube Heat Exchangers Part # 48570
45” L w/ ends 1.5” clamp, Tubes 15-5/8” ID, Two 3” Male NPT side inlets
10 sq. ft – heat exch. area
Safgard Sanitary 3-A Approved Model M Plate Coolers (bring milk temp. to within 3 deg. C of water temp., cut compressor time by 50%, cool milk from 95 deg. F to 55 deg. F, place filter prior to plate cooler, 3mm/plate spacing, 1.5mm spacing for plate ends, water flow exceeds milk flow by min. of 2-2.5 times, capacities based on continuous flow)
Model M300 w/ 24 Plates & 3065 Lbs./Hr. Part # 47343
Model M400 w/ 30 Plates & 4200 Lbs./Hr. Part # 47337
Model M600 w/ 42 Plates & 6245 Lbs./Hr. Part # 47336
Model M800 w/ 54 Plates & 8285 Lbs.Hr. Part # 47336-2
Safgard Sanitary 3-A Approved Commercial Duty Plate Coolers (Up to 150 PSI)
Standard High Temp. Nitrile, EDPM, Flourocarbon Material, Full Drain Leak Detect Improved Heat Transfer, Titanium & Alloy Plates Available Reinforced Inlet & Metal Plate to Plate Alignment Device
| Commercial Duty Plate Coolers Up to 150 PSI | ||||
|---|---|---|---|---|
| Plates / Pass | End Plate | Milk Capacity | Dry Weight | Part Number |
| Model S-8 25 Plate / Single | Stainless | .65 Gal. | 200 lbs. | 47317 |
| Model S-8 45 Plate / Single | Stainless | 1.45 Gal. | 224 lbs. | 47318 |
| Model S-8 25 Plate / Single | Powder Coat | .65 Gal. | 200 lbs. | 47319 |
| Model S-8 45 Plate / Single | Powder Coat | 1.45 Gal. | 224 lbs. | 47320 |
| Plate Only | 1.3 lbs. | 47317-1 | ||
| Gasket Only | 47317-2 | |||
| Powder Coated Plate Coolers / Heat Exchangers w/ Std. Floor Frame | ||||
|---|---|---|---|---|
| Plates / Pass | End Plate | Milk Capacity | Dry Weight | Part Number |
| 35 Plate / Single | Powder Coat | 2.5 Gal. | 558 lbs. | 47321 |
| 77 Plate / Single | Powder Coat | 5.4 Gal. | 665 lbs. | 47322 |
| 99 Plate / Single | Powder Coat | 6.8 Gal. | 737 lbs. | 47323 |
| Plate Only | 2.8 lbs. | 47321-1 | ||
| Gasket Only | 47321-2 | |||
| 35 Plate / Single | Stainless | 2.5 Gal. | 788 lbs. | 47324 |
| 77 Plate / Single | Stainless | 5.4 Gal. | 905 lbs. | 47325 |
| 99 Plate / Single | Stainless | 6.8 Gal. | 967 lbs. | 47326 |
Air Cooled Cold Shot Chillers Revive/Reuse a milk tank with leaking cooling plates, less expensive than repairing the milk tank. Sized to cool 100% of milk entering tank, or sized to supplement existing refrigeration systems. Plate cooler and chiller combos easy to install, and require little space.
2 to 7.5 Ton Chillers: with a single-stage with one Copeland scroll compressor
10-20 Ton Chillers: with a two-stage with tandem Copeland scroll compressor
25 to 40 Ton Chillers: single Carlisle semi-hermetic reciprocating compressor w/ 2 unloaders
50 to 70 Ton Chillers: has 2 semi-hermetic reciprocating compress. w/ 2 unloaders on circuit A
80-100 Ton Chillers: has 3 Carlisle semi-hermetic reciprocat. compress. w/ 2 unloaders circuit A
Commercial Dairy Chillers From pre-cooling milk to pasteurization process, high-efficiency, indirect, and direct cooling can be achieved perfectly with Schlueter’s Commercial Dairy Chillers. Withstands harsh environments and maintains precise temperature control. Prevents downtime and gives energy savings.
