Schlueter Pulsation, Milking Claws & Jetter Systems, Milking Components, & Sanitary/Dairy Tubing
Category: Claws Pulsation & Milking Components
Pulsation Products
Schlueter Safgard™ Pulsation Systems & Products
Safgard™ Tuned Port Pulsators w/ Fresh Air Part # 23057
- Ultra-Modern Design – 33% Less Wattage than Competitive Models
- No Redundant Fittings or Gaskets
- Can be fitted w/ a new Service Kit in Under Three Minutes! (Time Savings in Maintenance)
- Micro-Adjust to Satisfy any Liner Shell Combination
- Works w/ Any Brand 24V DC Pulsation Control
Safgard™ Puls-Matic Direct Mount Electric Pulsators Part # 23060
(Direct Mount Pulsator w/ Fresh Air) Part # 23061 (Stall Cock Electric Pulsator) Part # 23066 (Stall Cock Pulsator w/ Fresh Air) Part # 23062
Safgard™ Puls-Matic Electric Pulsation Controller Systems Part # 23068
- Follow all state & local electrical codes when installing
- Will Operate 12 Direct-Acting 24V Pulsators, Has 16 Pulsation Ratio Selections
- Digital Driven w/ Overload Protection, Stays in Adjustment no Drift from Temp/Humidity
- Fits into most Existing Systems for Retro-Fit Upgrades
- Rates from 40-150 PPM
- Provides Self-Diagnosis to Identify Short Circuits on Drive Line
Safgard™ Puls-Matic Stall Cocks Threaded Stall Cock Part # 23067
Strap-On Stall Cock Part # 23072 (Repair Kit for Stall Cock) Part # 23077
*Parts and Diagram pg. 21 of Schlueter Dairy Catalog
Delaval Delatron™ Replacement Pulsators
12 Volt Pulsator w/o Card Part # 47040
12 Volt Pulsator w/ Card Part # 47042
24 Volt w/o Card Part # 47041
24 Volt w/ Card Part # 47043
- Delatron™ Plastic Top & Vents w/ Rubber Parts Part # 47128
- Delatron™ Replacement Kit for New Style Pulsators Part # 47126 (includes 1 rubber diaphragm w/ 2 white axles & 1 diaphragm w/ flappers, 5 base screws, 2 coil “O” rings, 1 base mt. “O” ring)
- Delatron™ Replacement Kit for Old Style Pulsators Part # 47127 (same parts as above) *Replacement parts in Catalog pg. 23
Pulsochecker Electronic Pulsation Systems Pulsator w/ Stall Cock Part # 47190 *Replacement parts in Catalog pg. 23
Portable Pulso-Tron Milking Systems Part # 47130 Std./Flow control. system for stanchions
- Integrates w/ Pulsochecker w/ microcomputer, milk flow sensor, SS hanging frame, & electrical/vacuum connections
Pulso-Tron Power Control Box Only Part # 47192
Interpuls™ Pulsators L 80 & L 90
L 80 Pulsators (60:40 Pulsator) Part # 47082 (70:30 Pulsator) Part # 47083
L 90 Pulsators (Better Filtration) (60:40 Pulsator) Part # 47075 (70:30 Pulsator) Part # 47076
Super-Puls II Pneumatic Pulsators Part # 47125 (60:40, like Interpuls™ no lubric., adj. rate)
Brk Pneumatic Pulsators Part # 47080 (60:40 ratio, 100% copy to Interpuls™)
*Interpuls™ Parts & Adapters on pg. 25-26 of Schlueter Dairy Catalog
Safgard™ Fresh Air Filters Complete Unit Part # 23080 Filter Replacement Part # 47289
- Fresh air filter keeps pulsators functioning properly & attaches to 3′ PVC
- Prevents dust & insects from entering line
- One Filter per 10 pulsators recommended
Fresh Air Nipple Only Part # 23079-1
Fresh Air Kit Bou-Matic™, Puls-Matic Part # 23079 Westfalia™, Beco™ Strangko™ Part # 23075
Kit Contains: 2 nipple adapters, 2 elbows – 90 deg. 3/8” hose x ¼” NPT, 2 hoses – 3/8” x 18” *Pulsation cover – cover for Part # 23075 Only
Schlueter Stall Cocks
Single Shot Stall Cock Delaval™ Part # 45271 Alternating Pulsation Part # 45271-A
Plastic Ferrule for Automatic Hose Attachments Part # 46265
Straight Stall Cocks for ½” Part # 45490 & for 3/8” Part # 45491
Angle Stall Cocks Part # 45492 (for ½”) & Part # 45493 (for 3/8”)
NEW Surepulse™ & Calf 35™ Pulsation Systems from Schlueter
Learn How to Milk Happier and Healthier Cows with Fuller Milk Outs and Far Less Teat and Udder Damage with Surepulse™ & Calf 35™ Pulsation Systems!
Surepulse™ Introduction
Surepulse™ as a stand-alone product includes plastic inserts – placed between the shell & liners to control the movement of liner walls
Performance Benefits Surepulse™ System
- Inserts help improve pulsation
- Control liner movement & limit liner’s erratic opening & closing
- Softer liner movement, reduced ballooning
- Dynamic control over collapse position on lymph/teat end, where high vacuum normally gives little/no control
Unparalleled Results Surepulse™
- Animal health (eliminates teat damage & improves mastitis problems)
- Cow comfort (full milk-outs resulting in increases in protein & butterfat)
- Longevity (increase lactations) & vastly improved udder health
- Reduced somatic cell counts
- Dramatically lowers and even rids farms of mastitis issues
Surepulse™ & Calf 35™ Equipment & Part Numbers
Calf 35 Complete System Part# 47700
Surepulse US22A Round Inflation Part # 47710
US33A Triangular Inflation Part # 47711
AMS-1 Shell Part # 47712
Pink Plastic Insert Part # 47713
Silver Insert Part # 47714
Short Air Tube Part # 47715
*Surepulse™ inserts control the movement of the liner wall, but Surepulse™ CANNOT control vacuum fluctuations or close the liner, however Calf 35™ does!
Milking Claws & Jetter Systems, Milking Components & Sanitary/Dairy Tubing
Schlueter Milking Claws, Jetter Systems, Milking Components & Sanitary/Dairy Tubing
Schlueter Cow Milking Claws
Schlueter Safgard™ Claws
- ¾” OD Nipple Claw Part # 20998 (for ⅝” hose) / ⅞” OD Nipple Claw Part # 20990 (for ¾” hose)
- Claw w/ shut-off valve Part # 20999
- Larger capacity/wider nipple spread – Includes Backflush Clip
- Weight 27 oz. without shut-off; Weight 33 oz. w/ shut-off
Safgard™ Parallel Claw ¾” OD Nipple Part # 20991 Parallel Claw 7/8” OD Part # 20989
Schlueter “Super Flow” & “Super Flow Light” Claws
“Super Flow Claw” Part # 21010 “Super Flow Light” Part # 21004
- Replacement for Delaval™ Claw w/ automatic vacuum shut-off
- Large nipple spread for wide-udder cows
Std. & Wide Barrel Claws Bou-Matic Replacem. Std. Barrel Claw Plain Nipple Part # 21007 Barrel Claws w/ Shut-off Part # 21121 Wide Body Barrel Claw Plain Nipple Part # 21008 Wide Body Barrel Claws w/ Shut-off Part # 21122
GTE Germania™ Top Entry Claws Standard Part # 21014 Parallel Part # 20951
GEA Westfalia™ Milking Claw Replacement Model C300E
(Notice Picture to see Narrow Nipple Spread Compared to C300V)
Claw w/ Shut-off: Part# 21118, Claw Without Shut-off: Part# 21119
Narrow nipple spread for rear quarters; & has automatic vacuum shut-off
GEA Westfalia™ Milking Claw Replacement Model C300V
Claw w/ Shut-off: Part# 21127, Claw Without Shut-off: Part# 21128
- Large nipple spread for wider-teat cows; & has automatic vacuum shut-off
Schlueter Flow Claws w/ Rubber Bumper Part for Delaval TM Claws # 20950
- Improved bowl w/ bottom bumper protects against breakage
- Automatic vacuum shut-off locks in place for wash
- 5/8″ outlet for greater milk flow capacity
- Has alternating pulsation air divider
DeLaval™ Harmony Model Replacement Claws Part # 21162
- Complete OLD style claw w/ valve
- Integrated center pipe & 5/8” outlet
- 16 oz. weight. 350 cc capacity
- (Parts found in Catalog pg. 14)
DeLaval™ Harmony Model Replacement Claws Part # 21163
- Complete NEW style claw w/ valve
- Integrated center pipe & 5/8” outlet
- 16 oz. weight. 350 cc capacity
- (Parts found in Catalog pg. 14)
AktivPuls™ Silicone-Pro Milking Claws & Liners (up to 7,000 milkings, only replace short milk tubes often, High-tech silicone w/ Smart Air integ. Vacuum ctrl. & Excellent self-cleaning)
AktivPuls™ Silicone-Pro Milking “Unit Complete” Part # 20820
AktivPuls™ Silicone-Pro Liner “M” w/o milk-flow monitor Part # 20823
AktivPuls™ Silicone-Pro Liner w/ Clear Cap Part # 20824
Schlueter Goat & Sheep Milking Claws
G&S Point Claws Part # 20855
G&S Point Claw Parts: (20855-1 “Cover” / 20855-2 “O-Ring” / 20855-3 “Bolt” / 20855-4 “Joint Section” / 20855-5 “Plastic Top” / 20855-6 “Inside Bolt Gasket” / 20855-7 “Plastic – 4 Hole hanger” / 20868 “¼” x 9/32” Vac. Y Connection” / 20869 “3/8” x ½” Milk Y w/ Hose Support” / 20872 “5/8” x ½” Milk Y” / 20875 “Hose Bracket”
G&S Auto Valve Claws (Claw Only) Part # 20858
Parts: 20858-1 Bowl, 20858-2 Bottom Bumper, 20855-3 Lifting Lever, 20855-4 Floating Valve
G&S New Auto Claw Valves (Claw Only) Part # 20850
Parts: 20850-1 Top Part w/ Valve, 20850-2 Bottom Plug Cap, 20850-3 Exterior Gasket, 20850-4 Valve Center, 20850-5 Interior Gasket, 20850-6 Stainless washing valve w/o
Schlueter Goat & Sheep Milking Components
DV Goat Claw Part # 20979 Stainless 90 Deg. ½” Adapter Part # 20859 Goat Window Claw “Window” Part # 21114 Goat Window Claw “Gasket” Part # 21115 Plastic Shell for Goat Milking Part # 20870 Plastic Shell for Goat Milking Part # 20873 (*Use 20871 liner with 20870 & 20873 Shells) Silicone Liner for Goat Milking Part # 20871
Plastic Shell for Goat/Sheep Milking Part # 20865 (*Use 20865 with any of following)
Silicone Short Liner for Sheep Part # 20866 Silicone Liner for Goat Milking Part # 20874 Silicone Long Liner for Sheep Part # 20867
Schlueter Safgard™ Jetter Washer Systems
Safgard Hang-It-All Jetter Systems Now One unit to hold: Delaval™, Surge™, Bou-Matic™ Universal™ & Safgard™ Claws (w/ Stainless Dist. Tee, Cups & Duckbill Drain) Jetter System for Delaval™ & Bou-Matic™: Part # 42658
Cup for Delaval™ Bou-Matic™ 1-3/8” x 2.5”: Part # 42659 Hang-It-All Cover Only: Part # 42655 Jetter System for Surge™: Part # 42657 Cup Only 2-1/8” for Surge™ & Sta-Rite™: Part # 42678
Safgard™ Heavy-Duty Jetter Systems (w/ Stainless Dist. Tee, Cups & Duckbill Drain)
Heavy-Duty Jetter System for Delaval™ Bou-Matic™: Part # 42662 HD Cover Only: Part # 42674
Heavy-Duty Jetter System for Surge™: Part # 42663
National Jetter Systems Cup guides designed for easy cup removal & replacement w/o wear (Std. w/ Stainless Dist. Tee, Cups & Duckbill Drain)
National Jetter System for Delaval™ & Bou-Matic™: Part # 42651 National Cover: Part # 42650
National Jetter System for Surge™: Part # 42652
Wire Rack Jetter Systems (w/ Stainless Dist. Tee, Cups & Duckbill Drain)
Wire Rack Jetter System for Delaval™ Bou-Matic™: Part # 42649 Wire Rack Cover: Part # 42645
Wire Rack Jetter System for Surge™: Part # 42648
Schlueter Jetter System Parts
Stainless Dist. Tee Part # 42694 Plastic Dist. Tee Part # 42667 Rubber Duckbill Drain Part # 42695 Plastic Tygon Connector Part # 42668 Plastic Tee Part # 42669
Milk-Rite Jetter Cups: 2” Cup for Surge™ Part # 42675 1-9/6” Cup Bou-Matic™ Part # 42679 1-3/8” Cup for Delaval™ Part # 42676 1.5” Cup for Delaval™ Part # 42677
Schlueter Drawer Style CIP Racks (Stainless drawer style rack w/ excellent drainage given bottom slot openings, snap-in style cups for quick attach/removal) 12” L x 8.5” W x 2.25” Depth CIP Rack Only, Drawer Style Part # 42610 Black Knob for Drawer Style Part # 42611 Stop Guide for Drawer Style Part # 42612
Schlueter Under-Curb Sliding CIP Drawers
| Schlueter Under-Curb Sliding CIP Drawer Systems | |
|---|---|
| Description / Model | Part Number |
| Under-curb mount sliding CIP Rack 49.5mm w/ Block (for smaller head inflations) | 42620 |
| Under-curb mount sliding CIP Rack 50.5mm w/ block (for Delaval™ & Westfalia™ shells) | 42621 |
| "O"-Ring for Under-curb CIP | 42623 |
| 49.5mm Block Only for Smaller Head Inflations | 42620-1 |
| 50.5mm Block Only for Delaval™ & Westfalia™ Shells | 42621-1 |
| Set of two Mounting Slides for Under-curb CIP | 42624 |
| Drain Assy. For Drawer or Fold-Down CIP Rack | 42625 |
| Stainless Mt. Plate for Undr-curb CIP Rack | 42626 |
| 52mm Under-curb mount sliding CIP Rack w/ Block | 42627 |
| 52mm Block Only for Under-curb CIP Rack | 42627-1 |
| 55mm Under-curb mount sliding CIP Rack w/ Block | 42628 |
| 55mm Block Only for Under-curb CIP Rack | 42628-1 |
| 56.5mm Under-curb mount sliding CIP Rack w/ Block | 42629 |
| 56.5mm Block Only for Under-curb CIP Rack | 42629-1 |
| 59mm Under-curb mount sliding CIP Rack w/ Block | 42630 |
| 59mm Block Only for Under-curb CIP Rack | 42630-1 |
Schlueter Fold-Down Style CIP Trays (Requires minimal curb space in upright position 5/8” wash nipple comes out the side to avoid pinching hose when unit is lowered)
| Schlueter Fold Down Style CIP Trays | |
|---|---|
| Description / Model | Part Number |
| Fold Down CIP Rack 49.5mm w/ Block (for smaller head inflations) | 42615 |
| 49.5mm Block Only for Fold Down CIP Tray | 41615-1 |
| 50.5mm Fold Down CIP Tray w/ Block for Delaval™ &Westfalia™ Shells | 42616 |
| 50.5mm Block Only for Fold Down CIP Tray for Delaval™ & Westfalia™ Shells | 42616-1 |
| 52mm Fold Down CIP Tray w/ Block | 42618 |
| 52mm Block Only for Fold Down CIP Tray | 42618-1 |
| 55mm Fold Down CIP Tray w/ Block | 42619 |
| 55mm Block Only for Fold Down CIP Tray | 42619-1 |
| 56.5mm Fold Down CIP Tray w/ Block | 42613 |
| 56.5mm Block Only for Fold Down CIP Tray | 42613-1 |
| 59mm Fold Down CIP Tray w/ Block | 42614 |
| 59mm Block Only for Fold Down CIP Tray | 42614-1 |
| 57mm Fold Down CIP Tray w/ Block | 42617 |
| 57mm Block Only for Fold Down CIP Tray | 42617-1 |
| Drain Assy. For Drawer or Foild Down CIP Tray/Rack | 42625 |
Schlueter Safgard™ Milking Components
Schlueter Safgard™ Stainless Steel Air Forks
| Schlueter Safgard™ Air Forks | ||
|---|---|---|
| Pictured Letter | Description / Model | Part Number |
| A | SS Single air fork 9/32" | 20995 |
| B | SS twin air fork 9/32" front to back | 20994 |
| B | SS twin air fork 1/4" front to back | 20994-1 |
| C | Plastic Twin Fork - front to back | 21006 |
| D | SS Germania™ Style air fork 9/32" front to back | 21000 |
| E | SS side to side air fork 9/32" | 20996 |
| F | SS IBA™ Style air fork 9/32" front to back | 21002-2 |
| G | SS IBA™ Style air fork 9/32" side to side | 21002-3 |
| G | SS Germania™ Style air fork 9/32" side to side | 21000-1 |
| H | SS Surge™ Style twin barbed (3/8" & 9/32") | 21170 |
Schlueter Stainless & Plastic Milker Shells
Delaval™ 06D Shell w/ SS Rolled Edge Replacement: Part # 11397
Bou-Matic™ Shell Replacement: Part # 11395 Surge™ Jet Flow Shell Replacement: Part # 11394
Plastic Shell Replacement for Universal™: Part # 11398
Plastic Shell Replacement for Transflow™: Part # 10195
Schlueter Milking Shells & Hose Clamps
| Stainless & Plastic Milking Shells & Hose Clamps | |
|---|---|
| Description / Model | Part Number |
| Hose Bundle Rings - Silicone | 45944 |
| Hose Bundle Rings - Nitrile | 45945 |
| Plastic Milk & Air Tubing divider hanger clip for hose | 45946 |
| Safgard™ Classic Shut-off valves (vented valve) | 46850 |
| Safgard™ Classic Shut-off valves (non-vented valve) | 46851 |
| New External O-Ring for shut-off valve | 46858 |
| Viton "O-Ring" for shut-off valve | 46856 |
| Tab retainer for Delrin™ & Surge™ shut-off valves | 46857 |
| Classic stainless shut-off valve - vented valve | 46852 |
| Classic stainless shut-off valve - non-vented valve | 46853 |
| "O" Ring Tesa for stainless shut-off valve | 46856-1 |
| Tabbed bottom Tesa for stainless shut-off valve | 46857-1 |
| Small "O" Ring 9/16" for stainless shut-off valve | 46873 |
| Large "O" Ring 3/4" for stainless shut-off valve | 46874 |
| Plastic hose shut-off valve non-vented for 5/8" hose | 46829 |
| Plastic hose shut-off valve vented for 5/8" hose | 46828 |
| "O" Ring for Plastic shut-off valve | 46875 |
| Tabbed retainer for plastic shut-off valve | 46872 |
| Stainless "Squeeze It" 5/8" Hose Clamp | 42692 |
| 7/8" ID Big Hose Squeeze Clamp | 42690 |
| Milky Sway Swivel™ for 5/8" and 9/16" hose - eliminates twist | 20952 |
Milk Hose Springs and Clamps Hose Support Spring Part # 45920 (for 5/8” hose) Claw Hanger (Safgard™, Bou-Matic™, Surge™) Part # 46830
1 ¼” Bulldog Clamp (for #46830 hanger) Part # 46104 for Delaval™ Part # 46831
**Snapper Clamps, Stainless Band Clamps and Extra Wide Hose Clamps: Find in Catalog Pg. 30
Schlueter Safgard™ Milk Carrying Cans & Pails
| Safgard™ Milk Carrying Cans/Pails | |
|---|---|
| Description / Model | Part Number |
| Stainless 35 Lb. Milk Pail w/ Long Handle | 48503 |
| Stainless 35 Lb. Milk Pail w/ Short Handle | 48503-A |
| Stainless 65 Lb. Milk Pail w/ Long Handle | 48500 |
| Stainless 65 Lb. Milk Pail w/ Short Handle | 48500-A |
| Stainless 80 Lb. Milk Pail w/ Long Handle | 48501 |
| Stainless 80 Lb. Milk Pail w/ Short Handle | 48501-A |
| Plastic 68 Lb. Milk Pail w/ Long Handle | 48522 |
| Plastic 68 Lb. Milk Pail w/ Short Handle | 48522-2 |
| 10 Gal. SS Milk Can w/ Mushroom Cover | 48532 |
| 90 Lb. SS Milk Can w/ Toggle Style Clamp & Cover | 48533 |
| 40 Qt. SS Milk Can w/ Cover | 48530 |
| SS Cover only for 40 Qt. Milk Can | 48531 |
| 2 Qt. SS Milk Carrying Can w/ Lid | 46520 |
| 5 Qt. SS Milk Carrying Can w/ Lid | 46521 |
| 10 Qt. SS Milk Carrying Can w/ Lid | 46522 |
Schlueter Safgard™ Stainless & Plastic Fresh Cow Pail Covers
Long Handle Westfalia Replacement Cover w/ Gasket Part # 48510
Short Handle Delaval Cover Replacement w/ Gasket Part # 48505
Stainless Fresh Cow Cover w/ Gasket (Long Handle w/ 5/8” Nipples) Part # 48502
Stainless Fresh Cow Cover w/ Gasket (Long Handle w/ ¾” Nipples) Part # 48502-2
Stainless Fresh Cow Cover w/ Gasket (Short Handle w/ 5/8” Nipples) Part # 48502-A
Gasket for All Stainless Covers Part # 48504
Gasket for Blue Plastic Fresh Cow Cover Part # 48499
Quarter Milkers Part # 48525 (One Gal. Capacity & Unique Shape Ensure Efficiency)
Schlueter Safgard™ Milk Can Carts and Strip Cups
10 Gal. Milk Can Cart Part # 21800 8 Gal. Milk Can Cart Part # 21801 2 x 10 Gal. Milk Can Cart Part # 21802 2 x 8 Gal. Milk Can Cart Part # 21803 8” Wheel for Cart Part # 25525 4 Qt. Aluminum Milk Pail Part # 46527 Strip Cup w/ Black Top Part # 44080 Strip Cup Black Top Only Part # 44081 Strip Cup – Cup Only Part # 44084
Standard Mobile/Portable Milker Systems
¾ HP Electric System (Less Milking Unit) Part # 48520
1 ½ HP Electric System (Less Milking Unit) Part # 48527 (¾ HP Unit 90 Lbs, 1 ½ HP Unit 140 Lbs.)
24” Wide Mobile Milking Units with Large 10” tires and American made Conde™ pump
Cow & goat units come as complete systems & directly plug into a 20 amp, 110 Volt outlet
- Cow Milking Unit: Part # 48520-1 & Two-Goat Milking Unit: Part # 48520-2
- Milking units include 70 lb. SS pail, cover & gasket, moisture trap, vacuum regulator & pneumatic pulsator
Safgard™ Portable Milker Systems
Available w/ 1.5 HP electric motor or 3.5 HP gas motor
1.5 HP Electric Milker for Cows Part # 48518 & for Goats Part # 48518-1
3.5 HP Gasoline Milker for Cows Part # 48517 & for Goats Part # 48517-1
Safgard™ Bucket Milker System For Cows: Part # 48526 & For Goats: Part # 48523
- Basic Milking System Durably built plus Value and Dependability
- 30 Liter stainless pail system includes: Bucket, Lid, Mounted Alt. Pneumatic Pulsator, Bumper
Hose Support Arms
SS Hose Support 2 3/8” Pipe Support Part # 21042
Delrin™ Side Block Part # 21041-1 & Reverse Bend Herringbone Hose Support Part # 21045
Stainless Adj. Curb Hose Positioner for Parallel Parlor Part # 21047
Spheric. Style Hose Positioner w/ Mt. Kit (to curb) (for 5/8” hose) Part # 21051
Spheric. Style Hose Positioner w/ Mt. Kit (to curb) (for ¾” hose) Part # 21051-1
Poly Block Parallel Hose Positioner for round edged curb Part # 21048
Poly Block Positioner for formed edged curb Part # 21049
Rubber Insert for both poly block positioners Part # 21048-1
Hose Support Arms now available for 2 3/8” pipe
Long wearing nylon ball – easiest to use for milking parlors
20” Unit Complete Part # 21030 24” Unit Complete Part # 21029 (Parts in Catalog pg. 19)
Stainless Pipeline Hose Tenders and Milk Tube Extensions
(#2 Below) 101 Hose Clamp – Single Puls Hose & 5/8” Milk Hose Part # 46076
(#3) 201 Hose Clamp Twin Puls Hose & 5/8” Hose Part # 46077
(#4) 2” Double Loop Hose Adj. Hook Part # 46078
(#5) 2” Single Loop Hose Adj. Hook Part # 46079
(#6) 3” Single Loop Hose Adj. Hook Part # 46101
S Tube Milk Tube Extension Part # 21129 (3/8” ID, for wide uddered cows)
(Complete detail of all claws, milking component replacement parts in Dairy Catalog Pg. 13-19, Inflations and Air Tubes: Find in Catalog on Pg. 29)
Schlueter™ Rubber/Silicone, Vacuum, High Pressure, and Milk Transfer Tubing
Transflow™ Vacuum Tubing (Black w/ white stripe or clear w/ black stripe)
- Flexible, Lightweight & outlasts rubber 5 to 1
| Transflow™ Vacuum Tubing in Single/Twin & Clear/Black | ||||
|---|---|---|---|---|
| Single/Twin | ID and OD | 100 Ft. Weight Lbs. | Clear Part # | Black Part # |
| Single | 1/4" ID x 1/2" OD | 9 | 46021 | 46001 |
| Single | 9/32" ID x 17/32" OD | 9 | 46022 | 46002 |
| Single | 3/8" ID x 5/8" OD | 13 | 46034 | 46004 |
| Single | 7/16" ID x 11/16" OD | 14 | 46035 | 46005 |
| Single | 1/2" ID x 3/4" OD | 17 | 46037 | 46007 |
| Twin | 1/4" ID x 1/2" OD | 20 | 46061 | 46051 |
| Twin | 9/32" ID x 17/32" OD | 22 | 46062 | 46052 |
| Twin | 3/8" ID x 5/8" OD | 27 | 46063 | 46053 |
Silicone Transparent Milk/Vacuum Tubing (Sold in 100 Ft. Coils Only)
- Unaffected by Temp., Silicone tubing is as flexible at -20 deg. as it is at +75 deg
- Use w/ vac. or air pinch valves 9/32” ID x 17/32” OD Twin Silicone Tube: Part # 45899
¾” ID x 1-5/32” OD Silicone Tube Part # 45898 9/16” ID x 15/16” OD Silicone Tube Part # 45900
7/8” ID x 1-3/8” OD Silicone Tube Part # 45897 5/8” ID x 1” OD Silicone Tube Part # 45901
T-100 Hose Cutter: (for 1” ID) Part # 46098 T-200 Hose Cutter: (for 2” ID) Part # 46099
BT-100 Blade Only Part # 46098-1 SSB-200 Blade Only Part # 46099-1
Schlueter Safgard™ Black Rubber Dairy Tubing
- 54 ft. L Durable non-kink hosing for commercial applications, straight cured prevents coiling
- Standard Package one coil, drop-ship programs available for quantity discounts
| Safgard™ Single & Double Black Rubber Dairy Tubing | ||||
|---|---|---|---|---|
| Single/Double | ID and OD | Wall Thickness | Shipping Weight | Part # |
| Single | 9/32" ID x 17/32" OD | 1/8" | 6 | 11072 |
| Single | 1/2" ID x 7/8" OD | 3/16" | 14 | 11088 |
| Single | 9/16" ID x 1-1/32" OD | 1/4" | 22 | 11093 |
| Single | 5/8" ID x 1-1/16" OD | 7/32" | 20 | 11096 |
| Single | 1" ID x 1-3/8" OD | 5/16" | 30 | 11098 |
| Double | 1/4" ID x 1/2" OD | 1/8" | 10 | 11148 |
| Double | 9/32" ID x 17/32" OD | 1/8" | 12 | 11152 |
Kuri Tec™ High Pressure Tubing
- Clear polyvinyl chloride; spiral poly cords reinforced for reduced elongation under pressure
- Self-extinguishing & ozone/atmospheric/chemical resistant
- Non-toxic compounds, non-marking, lightweight, w/ glass smooth interior
- Temp. Range 25 Deg. F to 150 deg. F
¼” x 7/16” Part # 45790 5/16” x 17/32” Part # 45791 3/8” x 9/32” Part # 45792
½” x ¾” Part # 45793 5/8” x 57/64” Part # 45794 ¾” x 1-1/32” Part # 45795
1” x 1-5/16” Part # 45796 1-1/4” x 1-5/8” Part # 45797 1-1/2” x 1-15/16” Part # 45798
Tigerflex™ PVC Milk Transfer Hose (1” Hose) Part # 45968 & (1 ¼” Hose) Part # 45969
1.5” Hose Part # 45970 (2” Hose) Part # 45971 (2.5” Hose) Part # 45972 (3” Hose) Part # 45973
Rubber Fab™ Custom-Made RF-FDA Hosing w/ Tri-Clamp & Bevel Seat Fittings
*Indicate Size of hose, fittings needed, and hose length (can combine tri-clamp & bevel seats)
(food grade, nitrile lined, seamless), -40 deg. F to 180 deg. F, Max pressure at 70 PSI is 150
Hose (per foot): 1-1/2” Part # 45980, 2” hose Part # 45981, 3” hose Part # 45983
Tri-Clamp Fitting: 1-1/2” Part # 45985, 2” TC Part # 45986, 3” TC Part # 45988
Bevel Seat w/ Nut: 1-1/2” Part # 45990, 2” Part # 45991, 3” Part # 45993